Tire Overview:

The Method RC Velociter Belted Pre-Mount 1/7 On-Road Tires are designed to increase stability and consistency at high speeds. Designed specifically for the rear of 1/7 scale RC vehicles, these Velociter tires are made from an advanced rubber compound specifically for speed runs and bashing. The tread pattern is designed to tackle concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/7 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Hive wheels and equipped with a removable 17mm hex.

Note:

Arrma 1/8 Felony Owners: These are the same diameter as the Felony front tires. Therefore, you need to change the gearing in the rear to match the front gearing. Or, you could have overdrive in the font by not changing
Arrma 1/8 Limitless Owners: These fit directly on the rear without any trimming or regearing. The 10mm wider stance enhances rear traction bias as well as providing a meaner look.
Arrma 1/8 Infraction Owners: These will work on the rear of the infraction but you will need to trim the fender flares in the rear to accommodate the wider tires. No regearing necessary as they are the same diameter as the stock rear tires.

Features:

Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds
Less tire expansion greatly reduces the “gyro” effect reducing the overall load on the servo, axles, plastics, and hub bearings
Unique “M” channel detail throughout provides a neutral/all-around performance on all concrete and asphalt surfaces
Generous tread depth for long wear and the ability to easily clear debris
Pre-mounted to Hive Wheels

Specifications:

Tires:
- Diameter: 3.94in (100mm)
- Width: 2.13in (54.1mm)
Wheels:
- Hex: 17mm
- Width: 2.13in (54.1mm)
- Center Bore: 0.84in (12.3mm)
- Weight: 5.92oz(168g)