Radiolink AT10II 2.4Ghz 12 Channel RC Transmitter and Receiver R12DS AT10 II PRM-01 Voltage Return for RC Drone Airplane Quad

AT10II Features:

—Excellent Anti-interference: Only 3ms for 12 channels synchronously, Strong anti-jumping DSSS&FHSS working synchronously to keep the excellent anti-interference performance.

—Real-time Information: Model voltage, RSSI signal strength, speed, altitude, distance and more on the LCD screen display. Support extended engine voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when work with flight controller APM or PIX.

—Multiple Alarm: Low RSSI alarm setting, low transmitter voltage, receiver voltage and extended engine voltage alarm. DD sounds and words alarming display on the backlight LCD screen to avoid ignorance when you are in noise environment.

—Voltage Protection System: RadioLink AT10II has included a circuit which prevents damage if you plug it in the wrong way. Low consumption of battery, A 3s 1800mAh liPo battery can work more than 12 hours.

—Suit Multiple Models: Support Radiolink’s R9DS, R12DSM, R6DS, R6DSM,R12DS, receiver. Works with most racer quads on the market, suitable for FPV racing drone, helicopter, multirotor, car, boat and more.

—Programmable Mix Control: 5-12CH can be customized of programmable mix control for fine control over most basic model aircraft functions.

—Variety Switches: Switches are various lengths for easy recognition and usage. 3 VR switches, 3 three-way position switches, 4 two-way position switches, 1 reset trainer switch. Support multiple aerial control mode and 2 PTZ *control

AT10II RC Transmitter Specifications:

Channels: 12CH

Control Distance: Up to 4000 meters in the air

Frequency: 2.4GHz ISM bands (2400MHz to 2483.5MHz)

Channel Bandswidth: 5.0 MHz

Spread Spectrum: DSSS&FHSS

Adjacent Channel rejection: 38dbm

Transmitter Power: <100mW (20dbm )

Operating Current: <90mA

Operating Voltage: 7.4~15.0V

Section Precision: 4096

Screen: 3.5 inches 16 colorful screen, 320*480 pixels

Support receivers: R12DS, R9DS, R6DS, R6DSM, and R12DSM

R12DS Receiver Specifications

Signal: SBUS,PWM

Channel: PWM 12 channels, SBUS 12 channels

Working Voltage: 4.8-10V

Working Current: 38-45mA（input voltage: 5V）

Size: 5*3.2*1.5cm

Weight: 20g

Prm-01 Voltage Telemetry Module Specifications:

Size: 33*22*11mm (1.3″*0.87″*0.43)

Weight (with wire): 7g (0.25oz)

Voltage Input Range: 1S~6S LiPo Battery

Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D, R9D)

Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9

Package List with Receiver:

AT10II Transmitter Mode 2 or Mode 1 x1

Radiolink R12DS Receiver x 1

Radiolink PRM-01 module x1

Mode 1/2 changing parts x 1

Simple user Manual x 1

Transmitter Lanyard x 1

Package List Only TX:

AT10II Transmitter Mode 2(Dual stick back to center and default mode 2)

Mode 1/2 changing parts x 1

Simple user Manual x 1