Packaging Includes:
Motor fixing mount (1 set of 3 pieces)-3pcs
Cap head screw 4×12-2pcs
Cap head screws 3*14-2pcs
M3 stainless steel counter sink shims-2pcs
M4 stainless steel counter sink shims-2pcs
Motor base (1 set of 4 pieces)-4pcs
Flat head screw 4×12-4pcs
Cap head screws 4*14-2pcs
Cap head screws 4*16-8pcs
M4 stainless steel counter sink shims-4pcs
(Some screws are installed on the goods)

1. The aluminum 7075-T6 material has better fixation and is not easy to deform.
2. The Quick Release Motor Base original design has been changed to L-shaped one-piece structure makes it more firmly fixed, and more convenient to replace the motor gear, also it is compatible with more types of motors.
3. The Quick Release Motor Base Add two ribs on the side (specially used for XRT models), and the distance between the motor holes is 25MM and 30MM.
4. The fixing mount at the rear of the motor prevents the motor from moving, effectively protecting the motor and the mount from damage, and is more firmly fixed.
5. The Motor Fixing Mount It can be adjusted up and down, and can be installed with a motor with an outer diameter of 53-70mm (such as motor 2028-5687).

If 5687 or shorter motor is installed, it needs to be cut by itself (refer to the instruction diagram for cutting operation).

Suitable Models:
TRAXXAS-1/6 4WD XRT 8S
TRAXXAS-1/5 4WD X-MAXX 8S