Feature:
- Clipless ProGraphix® Body
- Easy one-handed removal
- Reinforced inner cage
- Strong oversized latch
- Rugged roof rollover protector
- Molded composite plastic wing
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Maxx duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- Up to 65+ mph with 3s LiPo battery
- TQi™ 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- 5-channel micro receiver (6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
- VXL-3s™ Waterproof Electronic Speed Control
- Three Programmable Drive Profiles:
- Sport Mode – Forward / Brake / Reverse
- Race Mode – Forward / Brake
- Training Mode™ – 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set® one-button setup
- Large heat sink
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- Three Programmable Drive Profiles:
- Velineon® 3500 kV Brushless Motor
- Ultra high-temperature sintered Neodymium magnets
- Optimized for power and efficiency in 1/10th scale vehicles
- Low-maintenance, unique Traxxas design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- 3500 kV
- Brilliant blue-anodized finish
- Traxxas Stability Management® (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on powerslides
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- Chassis
- Low-CG design for responsive handling
- Modular composite tub design
- Latching battery hold-down
- Reinforced integrated wheelie bar
- High-approach front bumper to climb curbs
- Drivetrain
- Maxx-duty driveshafts
- Sealed steel gear front and rear differentials
- Large 32-pitch gearing
- Heavy-duty slipper clutch with aluminum pads
- Anodized-aluminum center driveshaft
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Suspension
- Adjustable toe and camber links
- Impact-resistant suspension arm composite
- Oil-filled Ultra Shocks
- Rugged front and rear shock towers
- White powder-coated progressive springs
- Wheels and Tires
- Large 2.8″ black chrome wheels
- 2.8″ Talon™ EXT tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Specification:
- Length: 18.78 inches (477 mm)
- Width: 12.94 inches (329 mm)
- Ground Clearance: 1.1 inches (27 mm)
- Weight: 5.12 pounds (2.32 kg)
- Height: 6.35 inches (161 mm)
- Wheelbase: 11.62 inches (295 mm)
- Front Shock Length: Long
- Rear Shock Length: XX-long
- Tires (pre-glued): 4.5″ x 2.3″ (114 mm x 58 mm) Talon™ EXT
- Wheels: 2.8 inches (71 mm) black chrome
- Speed Control: VXL-3s™
- Motor (electric): Velineon® 3500 brushless
- Transmission: Single speed
- Overall Drive Ratio: 13.97:1
- Differentials: Sealed, 2-gear
- Chassis Structure / Material: Composite tub
- Brake Type: Electronic
- Drive System: Shaft driven 4WD
- Steering: Bellcrank with integrated servo saver
- Radio System: TQi™ 2.4 GHz 2-ch transmitter with 6533 TSM receiver
- Servo: Waterproof 2075
- Top Speed (optional gearing): 65+ mph with 3-cell LiPo and 20/54 gearing
- Skill Level: 1
- Battery Compartment: 162 mm x 50 mm x 25 mm
Include:
- Rustler 4X4 VXL with Velineon VXL-3s and 3500 kV motor
- Quick Start Guide
- TQi 2.4 GHz radio system
- High quality maintenance tools
- Includes speed pinion
Required:
- Batteries
- Charger