ABOUT:
Extremely narrow, extremely light and with utmost good spinning characteristics. The deep groove ball bearing 6701-2RS is extremely narrow and can also be used with limited space.
FEATURES:
- thin section bearing with ultra-thin cross section
- suitable for space-saving installation in radial and axial directions
- extra light series with compact dimensions and low weight
- suitable for radial loads and light axial loads in both directions
- offers high running accuracy and quiet running
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals:Â to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Technical Data
Inside Ø (mm): | 12 |
Outside Ø (mm): | 18 |
Width (mm): | 4 |
0/-0,011: | 0/-0,008 |
0/-0,120: | 0/-0,12 |
0/-0,008: | 0/-0,008 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Seal: | 2RS |
Sealing material: | NBR |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Seal Colour: | BLUE |
Internal Clearance: | CN (Standard) |
Tolerance Class: | ABEC 1 / P0 |
Noise and vibration testing: | Class V |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Magnetic: | yes |
Norm: | DIN 625-1 |
Item weight: | 3Â g |