In stock

SKU: 14889 Category:

ABOUT

Very narrow, very light and with extremely good spinning characteristics. The deep groove ball bearing 6800-2RS is very narrow and can also be used with limited space.

Technical ScribbleZoomable 

Technische Skizze 1: Deep Groove Ball Bearing 6800 / 61800 2RS 10x19x5 mm

Technical Data

Inside Ø (mm): 10
Outside Ø (mm): 19
Width (mm): 5
0/-0,011: 0/-0,009
0/-0,120: 0/-0,12
0/-0,008: 0/-0,008
Bore: cylindrical
Extended Inner Ring: no
Seal: 2RS
Sealing material: NBR
Ring Material: Rolling Bearing Steel
Rolling Element Material: Rolling Bearing Steel
Cage Material: Sheet Steel
Type of lubrication: greased
Lifetime lubricated: yes
Seal Colour: BLUE
Internal Clearance: CN (Standard)
Tolerance Class: ABEC 1 / P0
Noise and vibration testing: Class V
max. Operating Temperature: +100°C (briefly up to +120°C)
min. Operating Temperature: -20°C
Magnetic: yes
Norm: DIN 625-1
Item weight: 5 g

Features

  • thin section bearing with very thin cross section
  • suitable for space-saving installation in radial and axial directions
  • extra light series with compact dimensions and low weight
  • suitable for radial loads and light axial loads in both directions
  • offers high running accuracy and quiet running
  • seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
  • If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
  • good fixed bearing property, but can also be used as a floating bearing, each in both directions
  • manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)